Controller settings and Auto Door Opening
From the device manager press 'i' icon to access the controller settings:
Auto door open schedule:
This feature allows you to set a door to automatically Open and remain open for the set time on selected days.
In this example the door strike for the door is energised on Saturday and Sunday from 7am to 12noon and from Monday to Friday from 7am until 6pm.
The open padlock indicates door open
Outputs modes:
Normal: means the door will respond to cards/keys/pins or remotes according their allocated schedule.
Block: changes the the door status to allow only cards with blocked access to enter. This mode is selected in the credential parameters when adding or editting the card.
Hold Open: Holds the door in an open state from the time a authourised used presents a hold open card. This function is used to open the the door until the hold open card is presented again effectively togglling the door open, for example if a business wants the manager’s card to open the business’ door open when they open the door at the start of the day with their hold open card. The door will remain open until the card is presented again at close of business.
Controller settings
Entrance Output time sec: Determines how long power will be supplied or denied to your lock i.e the opening time in seconds.
DOTL: Door Opened Too Long if installed and configured this input will sound a buzzer and log an event if the door has been wedged open after the DOTL time has expired.
Entrance Closing time sec: Provides a voltage output for a buzzer or light to indicates the door is open.
Exit Output time sec: Determines how long power will be supplied or denied to your lock i.e the opening time.
DOTL: Door Opened Too Long if installed and configured this input will sound a buzzer and log an event if the door has been wedged open after the DOTL time has expired.
Exit Closing time sec: Provides a voltage output for a buzzer or light to indicates the door is open.
Lock Status: Indicates the current lock status Open, Normal, Hold Open or Blocked.
Open: Door current open.
Normal: Door is awaiting valid reads or triggering.
Block: Door is blocked to all cards except blocked cards.
Hold Open: Door held open by a hold open card.
Entry CCTV camera link: If a CCTV camera is linked to the controller, enter the IP address of the camera here to capture footage of the door or gate opening.
Entry RTSP camera link: IP address of camera
Exit CCTV camera link: If a CCTV camera is linked to the controller, enter the IP address of the camera here to capture footage of the door or gate opening
Exit RTSP camera link: IP address of camera