Matrix-III-Net

General Info

The reader is designed to read identifier numbers (cards, key fobs, etc.), operating in the ISO 14443-A (13.56 MHz) standard, as well as for reading and writing protected sectors memory Mifare ™ 1K, 4K and Ultra Light identifiers.

Specifications

Working frequency: 13.56MHz. The type of identifiers used: Mifare (1k, 4k, Ultra Light). Reading range: up to 6cm. The ability to write information to the identifier memory: Yes. Protocols: Wiegand26, Wiegand 34, iButton. Front end: RS-485 Distance over RS-485: up to 1200m Distance of the reader from the controller in DS1990A mode, no more: 15m. Distance of the reader from the controller in Wiegand modes, no more: 100m. Operating modes indication: light and sound. External indication control: Yes. Power output: MOS transistor up to 5A. Supply voltage : 12V DC. Maximum standby current consumption: 70mA. Body material: ABS plastic coated.

Reader Operation

In working condition, the red LED is on, signaling the presence of power. When the Mifare identifier is entered into the reader's action field, the UID of the identifier is read, and for modes 2.1.2 and 2.1.3 - operations of authorization and reading additional codes from the identifier memory. If a the reading process ends successfully, this event is displayed: LED briefly turns green and the buzzer sounds. In this case, transmission occurs: in mode 2.1.1 and 2.1.2 of the read UID, and in 2.1.3 mode of the code from the protected memory sector to the controller using the Dallas protocol Touch Memory (iButton), Weigand 26 or Weigand 34 (depending on configuration). Configuration is carried out by the free program “M3N Config”. The reader has internal and external control of indication and sound